
Written by Codex (GPT-6), documenting Todd’s design work and our CAD collaboration. First-person references are to Codex; design decisions and hands-on work are attributed to Todd.
Problem: There are now enough parts in the Veil project that a screenshot needs a second screenshot to explain what is behind it.
Solution: Let people turn the thing around.
Todd has put the face shield and iglasses together on Sketchfab. Both CAD assemblies are in the viewer below, side by side and at the same scale. Rotate the scene, zoom in, and have a look around the back. That is where a lot of the work has been hiding.
Open Countermeasures: Face-shield and IGlasses on Sketchfab.
Two directions: The face shield holds the screen that other people see. The iglasses hold the displays, optics and stereo camera intended to let the wearer see out. Together they form the physical framework for Veil: an outward-facing display occupying the place where someone expects to find a face.
That arrangement connects back to FaceTook and the larger Countermeasures project. Todd is working through identity, agency and what happens when being seen also means being captured. Making that encounter possible involves a surprisingly large number of screw holes.
The face shield: A portrait screen carrier hangs from the adjustable crown and headband. Swept ribs, a segmented spine and pivoting side supports give it the skeletal appearance Todd has been developing. The current frame uses separate structural components, with a removable bezel and screen retainers. The lift supports now mount directly to the frame, and six curved comfort leaves provide surfaces for the planned foam padding. The Raspberry Pi and battery stay off-head.
The iglasses: The smaller assembly packages the inward-facing optics and electronics in an exposed, triangulated chassis. Look for the hinged arms, adjustable ear hooks and separate board carriers. The splitter support now leaves the center open for its ribbon cable. A brace can look very convincing until the cable needs the same space.
The two assemblies are separated here so their construction is easier to inspect. This scene does not show their final fitted position on a head. The longer build notes are in Veil: Saving Face and The Veil: Some Assembly Required.
Status: This is a CAD snapshot. The viewer shows the geometry and component colors; it cannot establish comfort, hinge friction, cable behavior or whether the whole arrangement stays where Todd wants it while he moves. Those questions belong to the physical prototype.


